Controlled Humidity Salt Spray Prohesion Salt Fog Cyclic Corrosion
Salt spray tester is widely used in surface treatment proceedings
of various materials such as painting, electroplating, organic and
inorganic coating, anode processing, antirust oil and so on, with
this anti-corrosive treatment to test corrosion resistance of their
products, the quality control can be much more precise and reliable
to final confifently ensure the performance of the finished goods,
raw material and components.
Applicable testing standards:
ASTM B-117, B-287, B-380, JIS D-0201, D-0205, H-8681, Z-2371,
1. Patented nozzle and conical dispersion until ensure even
2. Touch-screen operator control interface.
3. Easy Open’ pneumatically operated canopy.
4. Large capacity floor standing salt solution reservoir.
5. Test duration depends on the specification or the corrosion
resistance of the material.
6. Spray gas treatment: spray gas two level voltage regulator
voltage regulator, at the same time, gas humidification filter to
|Inner chamber size W×H×D(cm)||60×45×40||90×60×50||120×80×50||160×100×50||200×100×60|
|Exterior chamber size W×H×D(cm)||107×58×103||138×80×115||170×95×121||225×120×125||265×120×135|
|Temperature range||Box temperature||Room temperature to +50℃,±0.5℃|
|Air saturation barrel||Brine tank temperature~63℃,±0.5℃|
|Brine tank temperature||Brine tank temperature~50℃,±0.5℃|
|Saturated air pressure(kgm2)||0.8~2.0|
|PH value of Copper acetate||3.0~3.2|
|Material||Exterior chamber material||P.V.C＆P.P|
|Interior chamber material||P.V.C＆P.P|
|System||Spraying system||Air acid (base)liquid|
|Heating system||SUS#Stainless steel high-speed heater|
|Controller||Hydrometer,salt meter,mist collector,glass bar|
|Other components||Digital electronic indicator+SSR+PID|
|Safety device||Over-heat protection circuit breaker, dehydration and over-heat
prevention mechanism,overload indicator|
|Power supply||AC 1phase 220V 50/60Hz|
|Customization service||Non-standard or special requirements are all welcome|
1. Can I visit Yuanyao factory? Can your factory arrange
transportation for me?
My dear, it is a great honor to invite you to visit Yuanyao
factory. We can arrange our driver
to pick you up from your hotel when you arrived in Guangzhou City.
2. Can your factory print our brand on the product?
Our factory can laser print customer’s logo on the product with the
permission from customers.
Customers need to provide us a logo usage authorization letter to
allow us to print customer’s logo on the products.
3. Does your factory have the design and development capabilities,
we need the customized
The staffs in our R&D department are well experienced in the
Climate testing industry, with more than 5
years experience. We can make customized products especially for
you; please kindly contact us for more details.
Hope your sincere inquiry.